-
-
After decades of development, Chinese industry has stepped into the international advanced ranks. Under such a big situation, domestic industries such as automobiles, communications, medical or clocks, mobile phones, and computers have made great progress
-
-
Shaft pin type components are usually used after machining and are used in bearings. In the bearing industry, some of them call him a roller needle or a roller.
-
-
Hydraulic cutting machine belongs to the machine category. In our work, the machine will inevitably cause some failures. Here we will analyze some common faults of the cutting machine during use. Usually you can solve it yourself.
-
-
The full name of the cutting machine is the precision four-column hydraulic cutting machine, which belongs to the new product of the 21st century, compared to the mechanical type in the 1970s, the hydraulic flat type in the 1990s and the hydraulic four-co
-
-
With precision machining, not all materials can be precision machined. Some materials are too hard and exceed the hardness of the machine parts and they may collapse. Therefore, these materials are not suitable for precision machining unless they are spec
-
-
For precision parts, the machining is very strict, and the machining process includes feeding and cutting. There are specific requirements on the size, accuracy is also required, such as 1mm positive and negative number of microns, etc., if the size is to
-
-
Mechanical precision machining, also known as precision machining, is different from ordinary machining. It requires more precision than ordinary machining. He mainly uses the processing machine to change the size of the workpiece. According to the proces
-
-
Pinghu Sunfly Precision Machinery Co.,Ltd Established in Huanggu Town, Pinghu, Zhejiang Province in 1988. The company was small in scale at the beginning of the business. It rented a factory area of less than 1,000 square meters and had about 20 employees
+86 573 85533398
Your Current Location: HOME > News center
News center
